 |
| Quantity: | |
|---|---|
Product Category：General model spray gun
Model：FM-191
Application
Ultra-low pressure atomization makes DD-1 more suitable for self-presenting in varnish and expensive coatings.
Stainless steel nozzle configuration is suitable for: aurora color spraying, insulating coating, leather hand paint spraying, adhesive coating adhesive, decorative paint on decorative surface。
Specially configured needle tips are suitable for: non-stick pan, ceramic glaze, abrasion resistant coating (brake disc, piston guide sleeve, etc.), Teflon coating, vacuum flask, fluorocarbon paint, etc.
Stainless steel gun body is more suitable: water-based paint construction, such as daily necessities, laptop spraying,communication products spraying, beauty products (spraying in the cosmetics industry)
Product Features
A low-pressure and high-atomizing external control automatic spray gun made of food-grade stainless steel is installed in a centralized manner, and all pipelines are processed in a post-installed centralized manner, making the on-site pipelines more neat and beautiful.
Tail with micrometer scale valve, precision adjustment,to ensure the accuracy of the amount of coating.
VOC2 emission reduction of at least 35%
High wear-resistant tungsten carbide needle mouth
Ultimate fine atomization 35 microns
Paint transfer efficiency is 65% or higher
Atomization pressure 1.8Bar
Provincial paint 15%
Product parameter
All the data in the table are collected from CNISOO / CNSEIKO laboratory. The test fluid is tap water with PH = 7, the coating pressure is 1Bar, and the pipeline is directly connected. The atomized particle data is laser diffraction.
参数表一Form 1：
Model | FM191 |
Nozzle Diameter (mm) | 0.9/1.2/1.5 |
Air Consumption (l/min） | 200 |
Output (ml/min) | 0~550 |
Pattern Width (mm) | 280@H=300mm |
Air Cap Model | Five-axis machining forming a spray cap |
Supply System | Type of pressure stable and paint filter |
Mounting hole diameter (mm) | ￠16mm |
◎It will vary with the paint volume,spray width,paint viscosity and pressure
Form 2：
max paint pressure | 0.7Mpa |
atomization air pressure | 0.1-0.4Mpa |
air inlet pressure | MAX0.6Mpa |
pressure of switch spray gun | 0.35-0.5Mpa |
air consumption | 450L/min |
paint output | 0~350ML/min |
Products Detail
The era of worn and leaking nozzle is over. Test data show that in the emery, quartz sand liquid scour, the minimum service life in 0.6Mpa pressure impact, has exceeded 9.6 million times. Atomization cap adopts RP technology of low pressure and high atomization to make atomization more delicate.
The gun body is made of ADC12 alloy. It is hot-formed by a 500T Nissan die-casting machine using a special mold. The air inlet interface adopts the design method of in-line hose, which reduces the customer's installation time and maintenance time. If equipped with our company's professional paint connector, the model is ACC. It only takes 5 seconds to replace a spray gun.
The spray gun nozzle is made of 304 stainless steel, which is resistant to corrosion and abrasion. At the same time, it is equipped with a compound needle with a patent number of CN107081232A to adapt to special performance coatings. Such as: ceramic coatings with high abrasion performance, PTFE coatings, water-based coatings with high solid content, special coatings containing sand and so on.
The air cap is made of environmentally friendly copper alloy after five-axis CNC machining. Each atomizing cap has undergone professional testing and test spraying to prevent poor atomization during spraying, thereby reducing the defective rate caused by spray gun spraying in production.
According to different installation methods, the spray gun body is designed with a Φ16mm mounting hole to fit the mounting bracket for general scenes, or it can be used with our company's professional mounting bracket.
Product Category：General model spray gun
Model：FM-191
Application
Ultra-low pressure atomization makes DD-1 more suitable for self-presenting in varnish and expensive coatings.
Stainless steel nozzle configuration is suitable for: aurora color spraying, insulating coating, leather hand paint spraying, adhesive coating adhesive, decorative paint on decorative surface。
Specially configured needle tips are suitable for: non-stick pan, ceramic glaze, abrasion resistant coating (brake disc, piston guide sleeve, etc.), Teflon coating, vacuum flask, fluorocarbon paint, etc.
Stainless steel gun body is more suitable: water-based paint construction, such as daily necessities, laptop spraying,communication products spraying, beauty products (spraying in the cosmetics industry)
Product Features
A low-pressure and high-atomizing external control automatic spray gun made of food-grade stainless steel is installed in a centralized manner, and all pipelines are processed in a post-installed centralized manner, making the on-site pipelines more neat and beautiful.
Tail with micrometer scale valve, precision adjustment,to ensure the accuracy of the amount of coating.
VOC2 emission reduction of at least 35%
High wear-resistant tungsten carbide needle mouth
Ultimate fine atomization 35 microns
Paint transfer efficiency is 65% or higher
Atomization pressure 1.8Bar
Provincial paint 15%
Product parameter
All the data in the table are collected from CNISOO / CNSEIKO laboratory. The test fluid is tap water with PH = 7, the coating pressure is 1Bar, and the pipeline is directly connected. The atomized particle data is laser diffraction.
参数表一Form 1：
Model | FM191 |
Nozzle Diameter (mm) | 0.9/1.2/1.5 |
Air Consumption (l/min） | 200 |
Output (ml/min) | 0~550 |
Pattern Width (mm) | 280@H=300mm |
Air Cap Model | Five-axis machining forming a spray cap |
Supply System | Type of pressure stable and paint filter |
Mounting hole diameter (mm) | ￠16mm |
◎It will vary with the paint volume,spray width,paint viscosity and pressure
Form 2：
max paint pressure | 0.7Mpa |
atomization air pressure | 0.1-0.4Mpa |
air inlet pressure | MAX0.6Mpa |
pressure of switch spray gun | 0.35-0.5Mpa |
air consumption | 450L/min |
paint output | 0~350ML/min |
Products Detail
The era of worn and leaking nozzle is over. Test data show that in the emery, quartz sand liquid scour, the minimum service life in 0.6Mpa pressure impact, has exceeded 9.6 million times. Atomization cap adopts RP technology of low pressure and high atomization to make atomization more delicate.
The gun body is made of ADC12 alloy. It is hot-formed by a 500T Nissan die-casting machine using a special mold. The air inlet interface adopts the design method of in-line hose, which reduces the customer's installation time and maintenance time. If equipped with our company's professional paint connector, the model is ACC. It only takes 5 seconds to replace a spray gun.
The spray gun nozzle is made of 304 stainless steel, which is resistant to corrosion and abrasion. At the same time, it is equipped with a compound needle with a patent number of CN107081232A to adapt to special performance coatings. Such as: ceramic coatings with high abrasion performance, PTFE coatings, water-based coatings with high solid content, special coatings containing sand and so on.
The air cap is made of environmentally friendly copper alloy after five-axis CNC machining. Each atomizing cap has undergone professional testing and test spraying to prevent poor atomization during spraying, thereby reducing the defective rate caused by spray gun spraying in production.
According to different installation methods, the spray gun body is designed with a Φ16mm mounting hole to fit the mounting bracket for general scenes, or it can be used with our company's professional mounting bracket.
